|
|
|
|

SOCKET CHISELS
| Item |
|
|
|---|---|---|
|
||
|
|
||
| BARTONCHISSQEDGEFRAME-3/4 | BARTON - 3/4" LONG SQUARE EDGE SOCKET FRAMING CHISEL. c.1900. Laminated. Length edge to socket=10-1/8". VERY RARE & EXC *PIC* | 129.95 |
| BARTONCHIS-1 | BARTON - 1" OVAL BACK SOCKET FRAMING CHISEL. c.1900. Laminated. Length edge to socket=11". VERY RARE & EXC *PIC* | 139.95 |
| BARTONCHIS-1-1/4 | BARTON - 1-1/4" SQUARE EDGE SOCKET CHISEL. c.1900. Length edge to socket=9-1/4". VERY RARE & EXC *PIC* | 139.95 |
| BARTONCHIS/SLICK-2 | BARTON - 2" OVAL LONG HEAVY BACK SOCKET FRAMING CHISEL. c.1900. Laminated. ORIGINAL HANDLE. Length edge to socket=18-5/8". Minor owner's initials on socket. Slicks technically start at 2-1/2" widths, but this 2" "chisel" is made like a long slick. No pitting. EXTREMELY RARE & EXC *PIC* | 498.95 |
Chisel Notes: All chisels, gouges, slicks, etc. listed are handled, honed sharp and ready to use. Any defects, such as pitting, are always noted. |
||
| Item |
|
|
|---|---|---|
|
||
|
|
||
| BARTLONGGOUGE-1/2 | BARTON - 1/2" SOCKET GOUGE. c.1900. Inside bevel. Length edge to socket=13". VERY RARE & EXC *PIC* | 179.95 |
| BARTPMGOUGE-1/2 | BARTON - 1/2" SOCKET GOUGE. c.1900. Inside bevel. Length edge to socket=7-7/8". VERY RARE & EXC *PIC* | 98.95 |
Chisel Notes: All chisels, gouges, slicks, etc. listed are handled, honed sharp and ready to use. Any defects, such as pitting, are always noted. |
||
| Item |
|
|
|---|---|---|
|
||
|
|
||
Chisel Notes: All chisels, gouges, slicks, etc. listed are handled, honed sharp and ready to use. Any defects, such as pitting, are always noted. |
||
| Item |
|
|
|---|---|---|
|
||
|
|
||
Chisel Notes: All chisels, gouges, slicks, etc. listed are handled, honed sharp and ready to use. Any defects, such as pitting, are always noted. |
||
| The following condition ratings are used to qualify and describe items in a general manner. In addition, most items are described with remarks in respect to percent of original finish (including re-paints); pitting; chips; breaks; repairs, owner's marks; missing, replaced and/or non-vintage parts, etc. My perception of condition is conservative and hopefully you will be pleased with receiving an item that will be better than your expectations. | |
| N (NEW & UNUSED) | Never been used. May or may not have original box and/or packaging. **I prefer not to use the term "mint" in describing tools - a word more suitable in discussions of coins and stamps**. |
| LN (LIKE NEW) | Little or no use. May have had "shelf" wear or tarnish from improper storage. |
| EXC++-LN (EXCELLENT++-LIKE NEW) | Very light use. Retains most of the original finish. All parts vintage correct and functional, complete. |
| EXC, EXC+ (EXCELLENT, EXCELLENT+) | Has had careful, moderate use. Better than 75% original finish. All parts vintage correct and functional, complete. |
| VG, VG+ (VERY GOOD, VERY GOOD+) | Shows use. Finish less than 75%. May have minor cosmetic defects. All parts may or may not be vintage correct but will be functional, complete. |
| G (GOOD) | Heavy use. Finish spotty. Some parts may be worn, replaced and/or repaired and may need to be replaced for item to be functional. |
| F (FAIR) | May or may not be suitable for restoration and mostly useable for parts. |
| P (POOR) | Every aspect of the item in poor repair with major defects, missing parts, etc. |
|
Best time to call is from 1:00 p.m. to 3:00 p.m., Pacific Time or whenever you can catch me |
**All items subject to prior sale** |
| To order or inquire about availability of items, please contact me via Email: bktools@olympus.net or call (360) 452-2292. Best time to call is from 1:00 p.m. to 3:00 p.m., Pacific Time or whenever you can catch me. |
| BOB KAUNE - ANTIQUE & USED TOOLS - Dept WWW - 511 W. 11th, Pt. Angeles, WA. 98362 |

Go To --
| STANLEY PLANES, SCRAPERS & SPOKESHAVES |
| PARTS |
| TOOL LITERATURE |
| OTHER STANLEY ITEMS |
| NON-STANLEY TOOLS |
| CHISELS, GOUGES, SLICKS, ETC. |
| SAWS |
| HOME | SPECIAL | INFO & ORDERING | TOOL OF THE WEEK | SELDOM SEEN | BED ROCK TYPES | FAQ | LINKS |
Updated: Saturday, July 31, 2010